If you notice any software malfunctions with your Karbonn Titanium S1 Plus android device, you're most likely required to download and flash stock ROM firmware on your Titanium S1 Plus to permanently correct the software errors you noticed on your Karbonn Titanium S1 Plus. And when you load stock firmware on your Karbonn Titanium S1 Plus using any Qualcomm flash tool, your Karbonn Titanium S1 Plus will be reset to factory defaults settings and by that, definately, your UserData will be lost including contacts, messages and others.
If your device has been bricked and want to unbrick it, you will need to pay closer attention to the tutorials contained below here.
Karbonn Titanium S1 Plus Stock ROM Firmware Download Link(s)
1. Karbonn Titanium S1 Plus (4.3 1.7T24 20140612 1010) Stock ROM
2. Karbonn Titanium S1 Plus (4.3 1.8T25 20140703 1243) Stock ROM
How to Flash Stock Firmware On Karbonn Titanium S1 Plus
1. Download your Karbonn Titanium S1 Plus stock ROM firmware from the link above.
2. Extract the Karbonn Titanium S1 Plus Firmware you downloaded from the link above onto a folder on your PC.
3. Download and install Qualcomm android device drivers on your PC. You may skip this step if you have installed Qualcomm drivers on your PC already otherwise, download Qualcomm drivers here
4. Now, choose either of the tools listed below here to load the stock firmware on your Karbonn Titanium S1 Plus.
Note
1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Karbonn Titanium S1 Plus.
2. If your device is bricked already, I recommend that you use Tool Studio eMMC Download Tool or QPST QFIL.
3. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Karbonn Titanium S1 Plus, if need be.
