Note:- This Is Complete Firmware For Samsung Galaxy J5 (SM-J500H) and I Can Help U To Unbrick Your Bricked Phone and It Can Also Make Your Phone FRP Removable.
Note #2:- Those Who Have A Problem Of Removing FRP From Samsung J5 (J500H) By Any Tool ( Z3X,OCTOPUS etc ) Just Write This Firmware and Erase FRP Again and U Will Get FRP Removed 100%.
MTK Droid Tool Is A Smart Tool Designed For Mediatek Smartphones [ MTK - MT65XX,MT6571,6572,6573,6575,6577,6580,6583,6589,6582,6735,6753,8127,6592,6595 ETC - EMMC ONLY ] To Take Backup Of Stock Firmware ( Scatter Based For SPFT ) , Repair IMEI , Backup / Restore NvRam ( NvRam = A File Which Contains IMEI,Wifi,Network etc,it also can fix unknown BaseBand ) and U Can Also Do Many Things With MTK Droid Tool ( Like Making CWM Recovery For Your Device )
Almost All MTK SmartPhones Supported ( Mediatek Chip Based Phones Only )
MT65XX
MT6571
MT6572
MT6573
MT6575
MT6577
MT6580
MT6582
MT6583
MT6589
MT6592
MT6595
MT6735
MT6753
MT8127 [ Tablets ]
MT8135 [ Tablets ]
How To Enable USB Debugging ?
GO TO Settings>Devolper Options> Enable USB Debugging or GO TO Settings>Applications>Devolpement>Enable USB Debugging
( If U Not Find Devolper Options In Settings Then U Need To Enable It By Going To Settings>About Phone> Tap 5-7 Times On Build No or Settings>About Phone > Software Info> Tap 5-7 Times On Build No )
Is Root Needed ?
Yes Phone Must Be Rooted and USB Debugging Must Be Enabled.Use IROOT or KingOROOT or KingRoot To Root Your Device.
How To Restore Backup Which I Created With MTK Droid Tools ?
Use SP Flash Tool ( SPFT ) To Write Backup To Phone.SPFT is A Official Too By Mediatek,Inc To Restore Backup.
Where I Can Get Drivers For My Phone ?
U Need ADB Drivers For Ur Phone To Work With MTK Droid Tools and U Can Download Drivers From Here
Why I Need To Backup My Phone Firmware ?
It Is Recommended You TO Take Backup Of Stock Firmware For Future Bcoz, If Ur Phone Become Faulty or Bricked In Future Than U Can Easily Unbrick Your Phone By Writing Your Backup Which U Made By MTK Droid Tools.
Note:- In Most Cases U Need A SDcard ( Atleast 4GB ) In Your Phone To Backup Stock Firmware. Have Any Question ? Plz Ask By Commenting Below
After Unzip You Will Find Some Files Inside [ See Image Below ]
Power OFF Your Phone
Now Press and Hold Volume Down + Home + Power Buttons Toggether Untill U See Blue Screen Your Phone,Now Press Volume Up Button To Get Odin Mode ( Download Mode )
Now Connect Micro USB Cable From Your Phone To PC.
Now Run Odin3-v3.10.X.exe from root package folder.
After Open Odin Program U Will See A Blue Highlighted Box In Odin ( If U Not See Blue Highlighted Box That Mean Phone Not Connected Succecfully,Check USB Drivers)
Now Click On AP Button and Browse Root Package Folder and Select CF-Auto-Root-herolte-heroltexx-smg930f.tar.mdf
Now Click On Start Button,now Odin Will Start Installing Root Package
After Complete Installation Your Phone Will Reboot and Start Rooting Itself.
After Complete Rooting Your Phone Will Start Normal and U Will See Super SU App On Your Phone.
Will Update More Soon !!! If Any Question Then Plz Ask Your Question By Commenting Below I Will Try To Give U Best Answer As Soon As Possible. Peace! _________________________________________________________________________________
Note #1: Only Above Listed Models Is Supported-If U Have An Other Model Then Stop ( U Can Check Your Phone Exact Model In Phone Settings>About Phone ) and Wait For That Model To Be Supported ( U Can Also Request Unsupported Model By Commenting Below )
Note #2:- Before Proceedding Make Sure U Backuped All Your Important Data and Your Battery Is Charged Enough ( Need Atleast 60% ) and Use Good USB Cable ( Don,t Use USB Hubs For Better Work )
Note #3:- Before Proceeding I Would Like To Tell U Plz Stop Here IF U Don,t Know What Is Rooting ?or What Is TWRP ?
Note #4:- Your Warranty Will Be Void After Rooting,this method is safe and tested but still Do At Your OWN Risk I,m not responsible for any damage of your phone
Instructions To Root and Install TWRP Recovery On Samsung Galaxy S7:
GO TO Settings > About Phone , Tap Of "Software INFO" then Tap On "Build number" about 7 times untill it says "Devolper Mode Has Been Turned ON".
Now Tap The Back Button Twice and U Will See "Devolper Options" In Setting Menu.Tap On It.
Make Sure "OEM unlock" Is Checked ON.
Power OFF Your Phone.Then Press and Hold Volume Up + Volume Down + Power Button Together for about 5-7 seconds untill u see blue warning screen,then release all buttons.
Press Volume Up Button Once To Get Phone In "Odin Mode".
Now Connect A Micro USB Cable from your phone to the computer/laptop.
Extract the ODIN zip file and you should get a folder with ODIN program. Double-click on the ODIN_3.10.x.exe file to run the ODIN program.
U Should See A Blue Highlighted box In Odin ( IF Not Then U Need To Install Samsung USB Drivers ).
Now Click On "AP" Button and Browse Your Download Folder and Select TWRP For Samsung Galaxy S7 ( Which U Have Downloaded Earlier )
Hit The Start Button.Now Odin Will Start Installing TWRP On Your Samsung Galaxy S7 and After Installation Complete Your Phone Will Reboot To Normal.
Copy the BETA SuperSU zip file and the file “no-verity-opt-encrypt.zip” to anywhere on your S7 Storage.
Power OFF Your Phone.Now Press and Volume Up + Home + Power Button Together For 7 Seconds Untill U See TWRP Recovery Mode.
From TWRP Choose "Install"
Choose the “no-verity-opt-encrypt.zip” file and swipe to install
Choose the “Beta-Super-SU-v2.68-xxx.zip” file and swipe to install
Choose “Reboot System” to reboot.
After Complete Start U Will Find Super SU Apk In Your Phone.
Congrats U Done it.
U Can Check Root Status By Installing Root Checker From PlayStore ( Optional )
If Any Question - Plz Comment Below I Will Try To Answer Your Questions As Soon As Possible.
- support SM-J320FN (Flashing, Direct unlock/read codes, Read/Write/Reset EFS, Read/Write CERT, reboot to download/recovery) - World First
- support SM-T280 (Flashing, Read/Write/Reset EFS, reboot to download/recovery) -World First
- support SM-T285 (Flashing, Direct unlock/read codes, Read/Write/Reset EFS, Read/Write CERT, reboot to download/recovery, Repair) - World First - support Read/Write Cert on android 6.0.1 based exynos phones (G920*, G925*, G928*, N920*)
Connect Phone ( ADB Must Be Enabled From Settings and Root Also Needed )
Insall Drivers If Needed
Now Type 1 (If Your Device Is By Samsung) or 2 ( For Any Brand except SAM) and Hit Enter
Now Wait For Done
Note: Allow/Grant Permission If Phone Ask For Permissions.In Some Samsung Phones Need To Enable CP Logging From Recovery Mode After Enable Diag Download Diag Enabler ( 4shared )
Pangu Team has dropped iOS 9.1 jailbreak today for 64-bit iPhone, iPad and iPod touch devices. The new tool is available for both Windows and Mac users.
Here is the official changelog of version 1.3.0 of Pangu for Windows and version 1.1.0 of Pangu for Mac : " Add support for iOS 9.1 devices (64bit only) iPhone(iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s), iPad( iPad Air 2, iPad Air, iPad mini 4, iPad mini 3, iPad mini 2, iPad Pro) "
As can be seen from the changelog, the new Pangu update only works on 64-bit devices which includes iPhone 6s/6s Plus, iPhone 6/6 Plus, iPhone 5s, iPad Air 2/1, iPad mini 4/3/2 iPad Pro and iPod touch 6, and that too if they are still running iOS 9.1 firmware.
U Can Remove Any Security Lock ( Patteren Lock , Pin Lock , Password Lock , Voice/Face Lock , Gesture Lock , Gmail Lock , Finger Print Lock etc ) Without Data Lost.3
Supported Devices:
All Samsung Android Devices
Any Android Devices
Supported Android Version:
UpTo 5.x.x
Install TWRP or Any Custom Recovery On Your Samsung Device and Root. Connect Your Phone In Recovery Mode and Run Tool. and Press Any Key To Continue. In Few Seconds Tool Will Destroy All Locks On Your Screen and Will Reboot Phone To Normal. And U Will See No Locks On Your Screen Anymore.
What If U See Any Lock On Screen After Successfully Remove ?
If U See Any Lock Then Type Any Patteren or Input Any Pin Or Pass.
