To flash your Intex Aqua Kat, you need to download the Intex Aqua Kat stock ROM whose download link is enclosed within here, then, follow the step by step instructions below to flash stock firmware on your Intex Aqua Kat.
Please note that flashing this Stock ROM Firmware on your Intex Aqua Kat will format and restore your device to factory defaults settings, hence, making you loose all the files therein. Therefore, you are advised to make a backup if you need to retain your files and data.
Note: If your Aqua Kat is already bricked and you want to unbrick it, you will need to pay closer attention to the tutorials contained below here.
Intex Aqua Kat Stock ROM Firmware Download Link(s)
1. Intex Aqua Kat (v03 India SER) Stock Firmware
How to Flash Stock Firmware On Intex Aqua Kat
1. Download your Intex Aqua Kat stock ROM firmware from the link above.
2. Extract the Intex Aqua Kat Firmware you downloaded from the link above onto a folder on your PC.
3. Download and install Spreadtrum android device drivers on your PC. You may skip this step if you have installed spreadtrum drivers on your PC already otherwise, download SPD drivers from here
4. Now, choose either of the tools listed below here to load the stock firmware on your Intex Aqua Kat.
Note
1. Each of the tools listed above contained step by step guides with illustrated pictures on how to flash stock firmware on your Intex Aqua Kat.
2. If you require any further assistance, simply drop your comment detailing the issue(s) and I shall help you revive your Intex Aqua Kat, if need be.
