Download iTEl 1520 Firmware / Pac File


Below is the direct link to download the Itel 1520 Stock Firmware (flash file) this Firmware contains Flash Tool, Driver and instructions.
Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.

ITEL 1520 QUICK SPECSDimension - 142.1 x 71 x 9.4 mm
5 - inch Touchscreen, 1280x720 pixels
Weight - 194g
1.3 GHz quad-core Processor
SPREADTRUM
2GB RAM
16GB Internal Memory
 
Up to 32GB microSD
13MP back Camera with dual flash, auto focus
13MP Front Camera
Dual SIM
EDGE , GPRS - 850 / 900 / 1800 / 1900MH
WCDMA 900/2100
WIFI 802.11 b/g/n
bluetooth 2.1 + EDR
5050mAh Battery

Below is the Firmware Stock ROM [Pac File]  for  iTEL 1520 

  • Download and Install Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
  • Download Stock Rom (Pac) for your Android Device.
  • Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files:
  • Now, open UpgradeDownload.exe.
  • Once Spreadtrum Upgrade Tool is launched, connect your Android device to the computer (make sure your device is switch off).
  • Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the .Pac file (Stock ROM which comes as .Pac).
  • Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
  • During the flashing process your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
  • Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool. Once your Android Device is successfully restarted, Go to Settings > About Phone > Check firmware.

ITEL 1520 STOCK ROM / PAC FILE
IT1520-H358A1-M-IN-160908V65