Below is the Firmware Stock ROM [Pac File] for Infinix Note 2 X600 LTE Clone Firmware
- Download and Install Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
- Download Stock Rom (Pac) for your Android Device.
- Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files:
- Now, open UpgradeDownload.exe.
- Once Spreadtrum Upgrade Tool is launched, connect your Android device to the computer (make sure your device is switch off).
- Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the .Pac file (Stock ROM which comes as .Pac).
- Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
- During the flashing process your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
- Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool. Once your Android Device is successfully restarted, Go to Settings > About Phone > Check firmware.
Infinix Note 2 X600 LTE Clone Firmware Flash File [Pac File]
Infinix_Note_2_LTE_X600_Android_5.1_Pac_File
S02_Q04_S02_Q04_DA213_5.1_ANDROID_5.1_V09_Infinix_NOTE_2_LTE
Download Now
Infinix Note 2 X600 LTE Clone Firmware
X600-H533-B1-L-20151125
Download Now
Infinix Note 2 X600 LTE Clone Firmware
Infinix_Note_2_LTE_X600_Android_5.1_Pac_File
Download Now
