Samsung Grand Prime ( Clone ) MT6572 Flash File
MT6572__samsung__SM-G530F__SM-G530F__4.4.4__ALPS.JB3.MP.V1 ( Preloader_snastar72_wet_lca.bin )
Password : all-gsm-solutions-g530f-sanstart72
Instructions :-
- Power on your PC as this process will require a PC, USB cable and Samsung Clone Phone.
- Download Drivers (both 1 and 2) , Flashtool and G530H Clone stock ROM from the link given above.
- Extract Drivers zip file in a folder
- Install Drivers and after installation reboot your PC once.
- Now you have to extract Flashtool and Run Flash_tool.exe
- Extract Stock ROM rar file in a folder.
- Click on Download tab in flashtool and click on Scatter-Loading
- Now browse to the ROM folder and select MT6572_Android_scatter.txt and click Open
- Now you have to Click on Download button.
- Power off your Samsung G530H Clone and take out its battery for a couple of seconds.
- Put the phone’s battery back in and connect your Mobile with PC using USB Cable.
- If everything goes well, you’ll see the progress bar and upon completion you’ll see Green Circle.
- Now you can Safely Remove your Phone from PC and power it on.
Congratulation, You have successfully Installed.
important note :- backup your important data first before do any thing. and if your imei is damaged after flashing click here or here or here to repair it
credits :- Tabraiz Ali
Wait for phone...
Phone found! [ 10 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A2058494E594812002A40496F2F
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594812002A40496F2F
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID : 0xAE6DAD6857E198D62C591B19F38FB389
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
Brand : samsung
ProdName : SM-G530F
ProdModel : SM-G530F
Device : SM-G530F
AndroidVer: 4.4.4
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1
[Read Ok] : preloader_sanstar72_wet_lca.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6572 / V1.1.1 / sanstar72_wet_lca / EMMC
Android Info saved
HWConfig Info saved
FW Size : 528 MiB
Scatter saved to : E:\MT6572__samsung__SM-G530F__SM-G530F__4.4.4__ALPS.JB3.MP.V1\
All done!
Done!
