Gfive Smart President 2_s 4.4.2 MT6572 Factory Firmware - Free Download - Instructions To Flash Firmware - Unbrick

Gfive_Smart_President_Smart_2_s_Firmware_Flash_File


Gfive Smart President 2_s Flashing and Firmware


Device Brand   : GFIVE
Device Model   : Smart_2s
Device CPU     : MT6572
Device IntName : Smart_2s
Device Version : 4.4.2
Device Compile : 11/26/2014 3:04:33 AM
Device Project : ALPS.KK1.MP7.V1
Device ExtInfo : GFIVE President Smart 2_s




  • Gfive Smart President 2_s Firmware - Download ( Link Is Not Enabled Yet )
  • Sp Flash Tool (Windows) – Download
  • Sp Flash Tool (Linux) - Download
  • Device Drivers – Download , Download 2


    1. Power on your PC as this process will require a PC, USB cable and Gfive Phone.
    2. Download Drivers (both 1 and 2) , Flashtool and Gfive stock ROM from the link given above.
    3. Extract Drivers zip file in a folder
    4. Install Drivers and after installation reboot your PC once.
    5. Now you have to extract Flashtool and Run Flash_tool.exe
    6. Extract Stock ROM rar file in a folder.
    7. Click on Download tab in flashtool and click on Scatter-Loading
    8. Now browse to the ROM folder and select MT6572_Android_scatter.txt and click Open
    9. Now you have to Click on Download button.
    10. Power off your Gfive Smart President 2_s and take out its battery for a couple of seconds.
    11. Put the phone’s battery back in and connect your Mobile with PC using USB Cable.
    12. If everything goes well, you’ll see the progress bar and upon completion you’ll see Green Circle.
    13. Now you can Safely Remove your Phone from PC and power it on.
    Congratulation, You have successfully Installed.


    Important note: Download Link Will Be Enabled Only After When We ll Get 10 Comments.and If U Can,t Wait or U Need Urgently Then U Can Buy It From Us By Contacting Us ( Only 5$ )